Stop Zero-Reclamation - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.2 Volume Management > stop zero-reclamation

stop zero-reclamation

This command stops Zero Reclamation. To display the progress of a Zero Reclamation process that is stopped
by this command, use the "show volume-progress" command.
■ Syntax
stop zero-reclamation {-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Example(s)
The following example stops Zero Reclamation for a TFV that is named "FTV0001":
CLI> stop zero-reclamation -volume-name FTV0001
The following example stops Zero Reclamation for volumes #80 – #99 at the same time:
CLI> stop zero-reclamation -volume-number 80-99
This parameter specifies the volume identifier for which Zero Reclamation is to be stopped.
Multiple volumes can be set in a single command. For details, refer to
(page 26).
volume_number
Volume number
volume_name
Volume name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume_number
| -volume-name
143
volume_name
}
"1.2.10 Volume Syntax"
P2X0-1210-05ENZ0