Show Host-Sense - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-sense

show host-sense

This command displays a list of the host responses and the associated sense code conversion information.
Only preset information can be shown.
■ Syntax
show host-sense
{-host-response-number
■ Parameter
-host-response-number
or
-host-response-name
■
Output
Host Response
Sense No.
Original Sense Code
Converted Sense Code
host_response_numbers
This parameter specifies the host response identifiers whose entries are to be displayed. One
or more host response identifiers can be specified at the same time. For details, refer to
Host Response Syntax" (page
host_response_numbers
Host response number
host_response_names
Host response name
Host response identifiers
No. Host response number
Name Host response name
Host sense number
Original sense code.
A sense key, an additional sense code, and a sub sense code (additional sense code qualifier)
appear in this order from left to right, delimited one by one by a slash.
Converted sense code.
A sense key, an additional sense code, and a sub sense code (additional sense code qualifier)
appear in this order from left to right, delimited one by one by a slash.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
| -host-response-name
28).
358
host_response_names }
"1.2.13
P2X0-1210-05ENZ0