Fujitsu Eternus DX100 S3 User Manual page 622

Chapter 5 System Settings and Display
5.3 System Settings > set power-synchronization
■ Example(s)
The following example sets how the shutdown function interacts with the external sensor. Both controller
modules are selected, the shutdown time is specified as 5 minutes, and the input signal that signals power
outage is specified as positive.
CLI> set power-synchronization -cm all -shutdown-time 5 -power-fail-signal positive
622
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0