Event Notification; Figure 46 Event Notification; Table 29 Levels And Contents Of Events That Are Notified - Fujitsu ETERNUS AF250 Design Manual

1. Function
Operation Management/Device Monitoring

Event Notification

When an error occurs in the ETERNUS AF, the event notification function notifies the event information to the
administrator. The administrator can be informed that an error occurred without monitoring the screen all the
time.
The methods to notify an event are e-mail, SNMP Trap, syslog, remote support, and host sense.

Figure 46 Event Notification

Server (host)
The notification methods and levels can be set as required.
The following events are notified.

Table 29 Levels and Contents of Events That Are Notified

Level
Error
Warning
Notification (information)
*1: Battery related events are notified only for the ETERNUS AF250 S2.
●
E-Mail
When an event occurs, an e-mail is sent to the specified e-mail address.
The ETERNUS AF supports "SMTP AUTH" and "SMTP over SSL" as user authentication. A method can be selected
from CRAM-MD5, PLAIN, LOGIN, or AUTO which automatically selects one of these methods.
●
Simple Network Management Protocol (SNMP)
Using the SNMP agent function, management information is sent to the SNMP manager (network management/
monitoring server).
Mail
server
E-mail
Host sense
ETERNUS AF
Level of importance
Maintenance is necessary
Preventive maintenance is neces-
sary
Device information
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
SNMP Syslog server
manager
SNMP Trap Syslog
REMCS/AIS Connect
Event contents
Component failure, temperature error, end of
battery life (*1), rebuild/copyback, etc.
Module warning, battery life warning (*1),
etc.
Component restoration notification, user log-
in/logout, RAID creation/deletion, storage
system power on/off, firmware update, etc.
82
Remote
support
center
P3AG-1822-09ENZ0