Fujitsu Eternus DX100 S3 User Manual page 756

Chapter 7 NAS Function Setting and Display
7.2 Network Interface > set nas-interface
-vlan-id
-ip
-netmask
-gateway
Optional. This parameter specifies a VLAN ID between 1 and 4095. To delete the VLAN ID,
specify a null character ("") or "0".
vlanid
VLANID (1 to 4094)
"" or 0 The VLAN ID is deleted.
This parameter is unavailable when firmware version V10L20 is being used. However, a value
("" or 0) to disable the VLAN ID can be specified.
Optional. This parameter specifies the IPv4 address of the NAS interface. To delete the IPv4
address, specify a null character ("") or "0.0.0.0".
• An address that conflicts with that of another NAS interface cannot be specified.
• The "-netmask" parameter must be set.
ip_address
IPv4 address of the NAS interface
Example: 192.168.0.100
"" or 0.0.0.0 The IPv4 address of the NAS interface is deleted.
Optional. This parameter specifies the subnet mask of the IPv4 address between 192.0.0.0 and
255.255.255.252. To delete the subnet mask of the IPv4 address, specify a null character ("")
or "0.0.0.0".
The "-ip" parameter must be set.
netmask
Subnet mask of IPv4 address
(192.0.0.0 – 255.255.255.252)
"" or 0.0.0.0 The subnet mask of the IPv4 address is deleted.
Optional. This parameter specifies the IPv4 gateway address. To delete the IPv4 gateway
address, specify a null character ("") or "0.0.0.0".
• The address of a different subnet cannot be specified.
• The "-ip" parameter must be set.
gateway_address
IPv4 gateway address.
Example: 192.168.0.1
"" or 0.0.0.0 The IPv4 gateway address is deleted.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
756
P2X0-1210-05ENZ0