Appendix A Error Messages/Error Codes; Error Messages; A.1 Error Messages - Fujitsu Eternus DX100 S3 User Manual

Appendix A
Error Messages/Error Codes
This appendix provides descriptions for the error messages and error codes that the CLI outputs.
A.1

Error Messages

This section explains error message numbers, and messages output to the CLI, as well as recommended
actions. Refer to
detailed explanation on CLI error messages.
Table A.1
Message
number
E0001
E0002
E0003
E0004
E0005
E0006
E0007
E0008
E0009
"1.7 Error Message Format" (page 34)
List of error messages
Bad value.
The operand of the specified parameter is incorrect. Check the parameters identified in the details of this
message.
Value out of range.
The operand of the specified parameter is out of the correct range. Check the parameters identified in the
details of this message.
Too many parameters.
Too many parameters were specified. Check the parameters identified in the details of this message.
Missing parameter.
Too few parameters were specified. Check the parameters identified in the details of this message.
Incorrect parameter combination.
The combination of the parameters specified is incorrect. Check the parameters identified in the details of
this message.
Inconsistent status.
The status of the object specified is inappropriate for the operation requested. Check the status of the
object identified in the details of this message.
Inconsistent usage.
The usage requested is incorrect for the specified object. Check the permitted usage of the object
identified in the details of this message.
Inconsistent size.
The size requested does not correspond with the current size. Check the size of the object identified in the
details of this message.
Inconsistent RAID level.
The operation is not appropriate for the RAID level of the specified RAID group. Check the RAID level of the
group identified in the details of this message.
ETERNUS CLI User's Guide
(in the overview section of this document) for a
Message
Countermeasure for the error
827
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0