Show Host-Groups - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show host-groups

show host-groups

This command displays existing host groups.
■
Syntax
show host-groups
[-host-group-number
[-host-number
■ Parameter
-host-group-number
or
-host-group-name
or
-all
-host-number
or
-host-name
host_group_numbers
host_numbers | -host-name
Optional. This parameter specifies the host group identifiers that will be displayed in detail.
When -all is specified, the details of all the existing host groups are displayed.
One or more parameters can be specified. For details, refer to
(page 30). If omitted, a summary of all the existing host groups will be displayed.
host_group_numbers
Host group number
host_group_names
Host group name
-all All the existing host groups
Optional. This parameter specifies the host that is included in the host group that is to be
displayed in detail. One or more parameters can be specified. For details, refer to
Group Syntax" (page 30).
host_numbers
Host number
host_names
Host name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
host_group_names
| -host-group-name
host_names ]
308
| -all]
"1.2.17 Host Group Syntax"
"1.2.17 Host
P2X0-1210-05ENZ0