Show Hardware-Information - Fujitsu Eternus DX100 S3 User Manual

Chapter 2 Status Display
2.1 Storage System Status > show hardware-information

show hardware-information

This command displays the hardware information for each enclosure and sub-component.
■
Syntax
show hardware-information
■ Parameter
No parameters.
■ Output
For each enclosure, the following items are displayed. All possible drive enclosures are displayed,
irrespective of whether or not they are currently installed. Drive enclosures that do not exist are indicated by
hyphens.
Serial No.
Other Information
For each component, the following items are displayed. For single controller models, both controller module
#1 and expander module #1 are indicated by hyphens. Information is not displayed for drive enclosures that
do not exist.
Part No.
Serial No.
Version
For each component, the following items are displayed. For single controller models, both BRT#1 and
QSFP#1 are indicated by hyphens. Information is not displayed for BRT that do not exist.
Part No.
Serial No.
Vendor Name
Serial number embedded in the enclosure
Individual identifier embedded in the controlling Fujitsu enclosure.
Part number embedded in the component
Serial number embedded in the component
Hardware revision of the component
Part number embedded in the component
Serial number embedded in the component
Vendor Name embedded in the component
67
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED P2X0-1210-05ENZ0