Create Ssl-Certificate - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > create ssl-certificate

create ssl-certificate

This command renews and registers an SSL (Secure Socket Layer) server key and an SSL server certificate.
■
Syntax
create ssl-certificate [-key-length {1024 | 2048 | 4096}]
-common-name
■ Parameter
-key-length Optional. This parameter specifies the bit length of the generating SSL server key. Only one
-common-name
common_name
[-subject-alt-name
value can be specified.
If this parameter is omitted, 2048 (default value) is used for the key length.
1024 Key length is 1024bits.
2048 Key length is 2048bits. (Default value)
4096 Key length is 4096bits.
This parameter specifies an IP address or domain name that accesses HTTPS for the MNT port
or the RMT port. The IP address should be written in IPv4 standard notation (a base 256
"d.d.d.d" string) or IPv6 address format. The domain name should be written in full-domain
notation (FQDN). Only one value should be specified for this parameter.
Example:
foo.var
192.168.1.1
2001:1b::430:db0
Abbreviated notations are recommended when inputting an IPv6 address. This is because
some browsers support only abbreviated notations.
common_name
IP address or domain name that can access HTTPS
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
altname1 altname2
,
576
...]
P2X0-1210-05ENZ0