Show Enclosure-Status - Fujitsu Eternus DX100 S3 User Manual

Chapter 2 Status Display
2.1 Storage System Status > show enclosure-status

show enclosure-status

This command displays a summary of the controller enclosure or the drive enclosure status. Details will be
displayed if the type of enclosure is specified.
■ Syntax
show enclosure-status [-type { all|ce|de [-de
■ Parameter
-type
-de
■ Output
The following information is the output information when all the parameters are omitted:
Storage System Name
Model Upgrade Status
Model Name
Serial Number
Device Identification Number
Status
Optional. This parameter specifies the enclosure type. If the type is omitted, only summary
information will be displayed.
all Detailed status of both the controller enclosure and all the drive enclosures are
displayed.
ce Detailed status of the controller enclosure is displayed.
de Detailed status of the specified drive enclosure is displayed.
Optional. This parameter can specify the drive enclosure number only when a drive enclosure
type is specified. For details, refer to
is omitted, all of the drive enclosures are selected. Other enclosure types cannot be specified.
Example: -type de -de 1
(When requesting drive enclosure #1 details)
ETERNUS DX name
Model upgrade status. This indicates whether or not the model can or has been
upgraded. If the model can and has been upgraded, [Upgraded] is displayed. If the
model can but has not been upgraded yet, [Not Upgraded] is displayed. If the model
cannot be upgraded, [Not Possible] is displayed.
Model name of the system
Serial number of the system
Device identification number used by the ETERNUS Multipath Driver or other external
software to identify the storage system.
Status of the system
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
enclosure_number
]} ]
"1.2.3 Drive Enclosure Syntax" (page
39
22). If this parameter
P2X0-1210-05ENZ0