Set Smi-S - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > set smi-s

set smi-s

This command enables or disables the SMI-S functions.
■
Syntax
set smi-s [-function {enable | disable}]
■ Parameter
-function
■ Example(s)
The following example disables all the SMI-S functions:
CLI> set smi-s -function disable
Optional. This parameter specifies whether all SMI-S functions are enabled or not. The initial
value is disabled. If omitted, the existing setting is not changed.
enable Each SMI-S function is enabled.
disable Each SMI-S function is disabled (default).
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
571
P2X0-1210-05ENZ0