Display Communication-Interface Hop-Channels - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Commands
Field descriptions (page 10)
Current System Information
Software Load The current software load on which the system is running.
Memory The system platform.
Configuration
Offer Category The system's offer category.
Last Translation Loaded Information
Software Load The software load translations saved before upgrade or reboot. Can
also be unknown/no trans if no flash card is present. Also, if load
translations were upgraded from one prior to G3V4 load 71 or early
G3V5 loads, unknown/no trans displays.
Memory The platform on which the translations were saved. Can also be
Configuration unknown if no flash card is present or translations made on old load.
This is important because platforms are not always compatible.
Offer Category The offer category that was set when the last save translation was
done before upgrade or reboot. Can also be unknown if no flash card
is present or translations made on old load.
display communication-interface
hop-channels
Use display comm hop to display the translation data for hop channels. A hop
channel is a bi-directional network channel between two interface links for DCS
message hopping. A hop channel is used to tandem DCS messages from one
interface link to another interface link. See
Action/Object Qualifier
display hop-
communication- channels
interface
print|
schedule
1 See the Report Scheduler and System Printer feature specification for more details.
216
Issue 5 October 2002
Qualifier Description
Number of the local processor
channel
Report sent to printer
Use the screen to schedule
execution of the command. The
command is placed in the command
queue and is executed at the
specified time. The information
displayed by the command is sent to
the system printer instead of the
1
screen.
''status link n'' for more details.
Logins Defaults
init none
inads
craft
cust
rcust
Feature
Interactions
none
555-233-119