Configure Esrp Delete Master - Extreme Networks ExtremeWare XOS Command Reference Manual

ESRP Commands

configure esrp delete master

configure esrp <esrpDomain> delete master <vlan_name>
Description
Deletes the specifies master VLAN from the specified ESRP domain.
Syntax Description
esrpDomain
vlan_name
Default
N/A.
Usage Guidelines
You must disable the ESRP domain before removing the master VLAN. To disable the ESRP domain,
use the
disable esrp {<esrpDomain>}
If you attempt to remove the master VLAN before disabling the ESRP domain, the switch displays an
error message similar to the following:
ERROR: Failed to delete master vlan for domain "esrp1" ; ESRP is enabled!
If this happens, disable the ESRP domain and re-issue the
Example
The following command deletes the master VLAN purple from the ESRP domain esrp1:
configure esrp esrp1 delete master purple
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
996
Specifies the name of an ESRP domain.
Specifies the name of the master VLAN.
command.
configure esrp delete master
ExtremeWare XOS 11.3 Command Reference
command.