Configure Esrp Timer Restart - Extreme Networks ExtremeWare XOS Command Reference Manual

ESRP Commands

configure esrp timer restart

configure esrp <esrpDomain> timer restart <seconds>
Description
Configures the ESRP restart timer value.
Syntax Description
esrpDomain
seconds
Default
The default restart timer value is 30 seconds.
Usage Guidelines
The restart timer specifies the amount of time that the neighbor ESRP switch remains in its current state
during a hitless failover. This timer prevent the slave ESRP switch from trying to become master during
a hitless failover.
The
seconds
To view the restart settings, use the
Example
The following command configures the restart timer value to 40 seconds for the ESRP domain
configure esrp esrp-1 timer restart 40
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
1030
Specifies an ESRP domain name.
Specifies the maximum length of time, in seconds, that the neighbor ESRP
switch remains in its current state during an MSM hitless failover. The range is
15 to 1024.
range is 15-1024.
show esrp {<name>}
command.
ExtremeWare XOS 11.3 Command Reference
:
esrp1