Configure Syslog Delete - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

configure syslog delete

configure syslog delete <host name/ip> {: <udp-port>} [local0 ... local7]
Description
Deletes a remote syslog server address.
Syntax Description
host name/ip Specifies the remote syslog server host name or IP address.
udp-port Specifies the UDP port number for the syslog target.
local0 ... local7 Specifies the local syslog facility.
Default
If a UDP port number is not specified, 514 is used.
Usage Guidelines
This command is used to delete a remote syslog server target.
Example
The following command deletes the remote syslog server with an IP address of 10.0.0.1:
configure syslog delete 10.0.0.1 local1
History
This command was first available in ExtremeWare 6.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
728 ExtremeWare 7.7 Command Reference Guide