Configure Syslog Delete - Extreme Networks ExtremeWare Command Reference Manual
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
Commands for Status Monitoring and Statistics
configure syslog delete
configure syslog delete <host name/ip> {: <udp-port>} [local0 ... local7]
Description
Deletes a remote syslog server address.
Syntax Description
host name/ip
udp-port
local0 ... local7
Default
If a UDP port number is not specified, 514 is used.
Usage Guidelines
This command is used to delete a remote syslog server target.
Example
The following command deletes the remote syslog server with an IP address of 10.0.0.1:
configure syslog delete 10.0.0.1 local1
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
660
Specifies the remote syslog server host name or IP address.
Specifies the UDP port number for the syslog target.
Specifies the local syslog facility.
ExtremeWare Software 7.3.0 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?