Unconfigure Ports Display String - Extreme Networks ExtremeWare XOS Command Reference Manual

unconfigure ports display string

unconfigure ports <port_list> display-string
Description
Clears the user-defined display string from one or more ports.
Syntax Description
port_list
Default
N/A.
Usage Guidelines
This command removes the display string that you configured using the
display-string
On a modular switch,
specification, see "Modular Switch Numerical Ranges" in Chapter 1.
Example
The following command clears the user-defined display string from slot 2, port 4 on a modular switch:
unconfigure ports 2:4 display-string
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies one or more lots and ports. On a modular switch, can be a list of
slots and ports. May be in the form 3-5, 2:*, 2:5, 2:6-2:8.
command.
can be a list of slots and ports. For a detailed explanation of port
<port_list>
unconfigure ports display string
configure ports
229