Unconfigure Inline-Power Priority Ports - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

unconfigure inline-power priority ports

unconfigure inline-power priority ports <portlist>
Description
Resets one or more ports to the default value of low priority.
NOTE
This command is available only for the Summit 300-48 switch.
Syntax Description
portlist Specifies one or more slots and ports. May be in the form 1:1,!:2, 1!:3-!:5.
Default
Low priority
Usage Guidelines
Power is allocated to ports by their designated priority. Power allocation is first provided to the higher
priority ports.
Example
The following example resets port 1:5 to low priority:
unconfigure inline-power priority ports 1:5
History
This command was first available in ExtremeWare 7.3e.
Platform Availability
This command is available on Summit 300-48 only.
2406 ExtremeWare 7.7 Command Reference Guide