Unconfigure Inline-Power Operator-Limit Ports - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module

unconfigure inline-power operator-limit ports

unconfigure inline-power operator-limit ports <portlist>
Description
Resets the operator limit back to the default for the specified ports.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
portlist Specifies one or more slots and ports. On a modular switch, can be a list of slots and ports. On a
stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 1:*, 1:5, 1:6-1:8.
Default
The default operator limit is 15400 mW.
Usage Guidelines
This command resets the operator limit that was configured with the following command:
configure inline-power operator-limit <milliwatts> ports <portlist>
The Summit 300-24 or 400-24p switch has an operator limit range of 300 to 15400 milliwatts. The
Summit 300-48 switch has an operator limit range of 300 to 20000 milliwatts.
Example
The following command resets the operator limit to its default for port 2 on slot 1:
unconfig inline-power operator-limit ports 1:2
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
2330 ExtremeWare 7.5 Command Reference Guide