Unconfigure Inline-Power Disconnect-Precedence - Extreme Networks ExtremeWare Command Reference Manual

unconfigure inline-power disconnect-precedence

unconfigure inline-power disconnect-precedence
unconfigure inline-power disconnect-precedence
Description
Returns the disconnect-precedence to the default value.
NOTE
This command is available only for the Summit 300-48 switch.
Syntax Description
This command has no arguments or variables.
Default
Deny-port
Usage Guidelines
The PoE controller disconnects one of the ports to prevent an overload on the power supply. The
disconnect function occurs when the power drain exceeds the available power budget because of a rise
in power consumption after power is allocated to the ports.
Example
The following example configures the disconnect precedence to disconnect the next port regardless of
priority:
unconfigure inline-power disconnect-precedence
History
This command was first available in ExtremeWare 7.3e.
Platform Availability
This command is available on the Summit 300-48 only.
ExtremeWare 7.5 Command Reference Guide 2329