Show Slb L4-Port - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

show slb L4-port

show slb L4-port [ftp | http | https | imap4 | ldap | nntp | pop3 | smtp |
socks | telnet | tftp | web | wildcard | www | <TCP or UDP port number>]
Description
Displays the SLB configuration for the active layer 4 ports.
Syntax Description
ftp
http
https
imap4
ldap
nntp
pop3
smtp
socks
telnet
tftp
web
wildcard
www
TCP or UDP port number
Default
N/A
Usage Guidelines
If you do not specify a port, configuration and status for all layer 4 ports is displayed.
Example
The following command displays the current layer 4 port configuration:
show slb L4-port
Following is the output from this command:
Port: 80 Enabled
History
This command was first available in ExtremeWare 6.1.
642
Specifies an FTP port.
Specifies an HTTP port.
Specifies an HTTPS port.
Specifies an IMAP4 port.
Specifies an LDAP port.
Specifies an NNTP port.
Specifies a POP3 port.
Specifies an SMTP port.
Specifies a SOCKS port.
Specifies a telnet port.
Specifies a TFTP port.
Specifies a Web port.
Specifies any port associated with a wildcard server.
Specifies a www port
Specifies a TCP or UDP port.
TCP idle timeout (treaper): 600 UDP idle timeout: 600
ExtremeWare 7.5 Command Reference Guide