Table of Contents
Advertisement
0 fragments, 0x8 last sent sequence number
Transmit Class 1:
0 fragments, 0x0 last sent sequence number
...
1 mlppp interfaces found
To display complete configuration, statistics, and status information of multiclass
MLPPP member links configured in the specified MLPPP bundle:
host1#show ppp interface mlppp bundle1 full
Bundle name: bundle1
MLPPP interface gigabitEthernet 3/0.1.1 is up
Link interface administrative status is open
PPP multilink multiclass is enabled
PPP multilink multiclass classes 4
PPP multilink multiclass fragmentation is enabled on "voice", otherData"
PPP multilink multiclass reassembly is enabled on "voice", "otherData"
...
LCP negotiated options
max-receive-unit
max-receive-reconstructed-unit 1590
authentication
magic-number
pfc
acfc
multiclass-classes
multiclass-sequence-format
...
1 mlppp interfaces found
Table 17 on page 359 lists the show ppp interface mlppp command output fields.
Meaning
Table 17: show ppp interface mlppp Output Fields
Field Name
PPP interface mlppp bundleName
PPP multilink member-interface
interfaceName
Link interface administrative
status
PPP multilink multiclass
PPP multilink multiclass classes
PPP multilink multiclass
fragmentation
Chapter 10: Configuring Multiclass Multilink PPP
local
peer
1590
1590
1590
none
none
0x78b5606f
0x5aa2de54
none
none
none
none
4
4
long
long
Field Description
Name and state (up or down) of the MLPPP interface
Name and state (up or down) of the MLPPP member
link interface
Administrative state of the member link interface:
open (enabled) or closed (disabled)
Configuration of multiclass MLPPP on the MLPPP
interface: enabled or disabled
Number of multilink classes created on the MLPPP
interface: 1 through 8
Configuration of fragmentation of the multiclass
MLPPP interface: enabled or disabled. If
fragmentation is enabled then the command also
lists the QoS traffic classes on which fragmentation
is enabled.
Monitoring Multiclass MLPPP
359
Advertisement
Table of Contents
Troubleshooting
