Oap Client Close; Oap Client Reboot - H3C CR16000-F Manual

Last registered: 02/08/2011 13:00:00
Table 1 Command output
Field
Status
MAC Address
Interface
Last registered
Related commands
display oap client info

oap client close

Use oap client close to shut down an OAP client.
Syntax
oap client close client-id
Views
System view
Predefined user roles
network-admin
Parameters
client-id : Specifies an OAP client by its ID in the range of 1 to 255. Client IDs are assigned by
the OAP manager to OAP clients to uniquely identify the clients.
Usage guidelines
This command applies only to OAP clients on Linux.
When you execute this command for a client in registered state, the OAP manager sends a
shutdown notification to the specified OAP client. The client stops after receiving the notification.
When you execute this command for a non-existent client, an error message appears.
Examples
# Shut down OAP client 1.
<Sysname> system-view
[Sysname] oap client close 1
Related commands
display oap client summary

oap client reboot

oap client reboot
Use oap client reboot to restart an OAP client.
Syntax
oap client reboot client-id
Description
Status of the OAP client, which is always Registered.
MAC address of the OAP client.
Interface used to communicate with the OAP client.
Registration time of the client.
3