Appendix D Arranging slots and
numbering interfaces
Slot arrangement
The router provides many types of interfaces, such as console, AUX, GigabitEthernet, serial
(synchronous), POS, and E1 ports. This chapter describes how these interfaces are numbered.
Figure 85 Slot arrangement on the SR6602-X1
Figure 86 Slot arrangement on the SR6602-X2
NOTE:
In
Figure 85
Available slots for FIP-10/FIP-20
Card
FIP-10
FIP-20
Numbering interfaces
Before installing a HIM/MIM, you must install a FIP. A FIP-20 supports both HIMs and MIMs, while a
FIP-10 supports only MIMs.
The interfaces of the router are numbered in the form of interface-type X/Y/Z,
Where,
•
interface-type—Type of the interface such as GE port and serial port.
through
Figure
86, the blue numbers represent slot numbers of the SR6602-X routers.
SR6602-X1
Slot 1
Slot 1
SR6602-X2
Slot 1
Slot 1
90