Fefd Reset - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.3.11.1

Version 8.3.7.0

fefd reset

Reset all interfaces or a single interface that was in "error-disabled" mode.

fefd reset [interface]

Not configured.

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

— enables far-end failure detection.

(OPTIONAL) Enter the following keywords and slot/port or

number information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/ port information.

Introduced on the S6000.

Introduced on the S4820T.