Advertise Med Voice-Signaling - Dell Force10 Z9000 Reference Manual

advertise med voice-signaling

Configure the system to advertise when voice control packets use a separate network policy than voice data.
C-Series, E-Series, S-Series, Z-Series
Syntax advertise med voice-signaling {vlan-id layer2_priority
DSCP_value} | {priority-tagged number}
To return to the default, use the no advertise med voice-signaling {vlan-id
layer2_priority DSCP_value} | {priority-tagged number} command.
Parameters
vlan-id
layer2_priority
DSCP_value
priority-tagged
number
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Related
debug lldp interface
Commands
show lldp neighbors
show running-config lldp
Enter the VLAN ID. The range is 1 to 4094.
Enter the Layer 2 priority (C-Series and E-Series only). The range is 0
to 7.
Enter the DSCP value (C-Series and E-Series only). The range is 0 to
63.
Enter the keywords priority-tagged followed the Layer 2
priority. The range is 0 to 7.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
– debugs LLDP.
– displays the LLDP neighbors.
– displays the LLDP running configuration.
975