Safety Notices - Keysight U1211A Quick Start Manual

Contacting Keysight
www.keysight.com/find/assist
(worldwide contact information for
repair and service)
Safety and EMC Information
The U1211A, U1212A, and U1213A
is safety-certified in compliance
with EN/IEC 61010-1, ANSI/UL
61010-1, and CAN/CSA-C22.2
No.61010-1-04.
EMC is designed in compliance
with IEC61326-1/EN61326-1,
CISPR 11/EN 55011 Group 1 class
A, ICES-001, AS/NZS CISPR11.

Safety Notices

CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in damage to the product or
loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are
fully understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in personal injury or
death. Do not proceed beyond a
WARNING notice until the
indicated conditions are fully
understood and met.
For further safety information details, refer to the
Keysight U1211A, U1212A, and U1213A Clamp Meter User's Guide.
2 Keysight U1211A, U1212A, and U1213A Quick Start Guide
Safety symbols
Direct current (DC)
Alternating current (AC)
Earth (ground) terminal
Application around and
removal from HAZARDOUS
LIVE conductors is
permitted
Equipment protected
throughout by double
insulation or reinforced
insulation
Caution, risk of electric
shock
Caution, risk of danger
(refer to this manual for
specific Warning or Caution
information)
Category III 1000 V
CAT III
overvoltage protection
1000 V
Category IV 600 V
CAT IV
overvoltage protection
600 V