Honda ACCORD HYBRID 2005 Service Manual page 390

PGM-FI System
D T C T r o u b l e s h o o t i n g (cont'd)
12. Check for continuity between ELD 3P connector
terminal No. 2 and body g r o u n d .
ELD 3P C O N N E C T O R
G N D
(BLK)
Wire side of f e m a l e t e r m i n a l s
Is there continuity?
Y E S — G o to step 13.
NO—Repair open in the w i r e between the ELD and
G302, then go to step 14.
13. Replace the under-hood fuse/relay box (see page
22-68).
14. Reconnect all connectors.
15. T u r n the ignition switch ON (II).
16. Reset the PCM w i t h the HDS.
17. Do the PCM idle learn procedure (see page 11-340).
18. Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — G o t o step 19.
NO—Troubleshooting is c o m p l e t e . •
19. Update the PCM if it does not have the latest
software, or substitute a k n o w n - g o o d PCM
(see page 11-6).
20. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — I f DTC P1298 is indicated, check for poor
connections or loose t e r m i n a l s at the ELD and the
PCM, then go to step 1. If any other T e m p o r a r y
DTCs or DTCs are indicated, go to the indicated
D T C s t r o u b l e s h o o t i n g .
NO—If the PCM was updated, troubleshooting is
complete. If the PCM w a s substituted, replace the
original PCM (see page 11-219). •
11-150