HP ProCurve 7102dl Reference Manual page 1026

SROS Command Line Interface Reference Guide HDLC Command Set
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Usage Examples
The following example configures the HDLC interface to receive LLDP packets:
ProCurve(config)#interface hdlc 1
ProCurve(config-hdlc 1)#lldp receive
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 1024