Hello-Time - Dell S4810 Reference Manual

Version 7.5.1.0
Version 6.5.1.0
Related
max-age
Commands
information.

hello-time

(BPDUs).
hello-time
Set the time interval between generation of MSTB bridge protocol data units (BPDUs).
S4810
Syntax
hello-time seconds
To return to the default value, use the no hello-time command.
Parameters
seconds
Defaults 2 seconds
Command MULTIPLE SPANNING TREE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.5.1.0
Related
forward-delay
Commands
the Learning State before transitioning to the Forwarding State.
1128
Introduced on the C-Series.
Introduced.
— changes the wait time before MSTP refreshes protocol configuration
— changes the time interval between bridge protocol data units
Enter a number as the time interval between transmission of
BPDUs. The range is from 1 to 10. The default is 2 seconds.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— the amount of time the interface waits in the Blocking State and
Multiple Spanning Tree Protocol (MSTP)