Show Ip Pim Bsr-Router - Dell Networking 7048 Reference Manual

Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following information is displayed:
Field
PIM Mode
Example
console#show ip pim
PIM Mode............................. None
If no routers are enabled for PIM, the following message is displayed.
None of the routing interfaces are enabled for PIM.

show ip pim bsr-router

The show ip pim bsr-router command displays information about a bootstrap
router (BSR). This command deprecates the show ip pimsm componenttable
and show ip pimsm bsr commands.
Syntax
show ip pim bsr-router {candidate|elected}
• candidate – Shows the candidate routers capable of acting as the bootstrap
router.
• elected – Shows the router elected as the PIM bootstrap router.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
1136
Multicast Commands
Description
The routers that are enabled for PIM.