Show Ip Pimsm Bsr - Dell PowerConnect 8024 Cli Reference Manual

show ip pimsm bsr

The show ip pimsm bsr command displays the bootstrap router (BSR) information. The output
includes elected BSR information and information about the locally configured candidate
rendezvous point (RP) advertisement. This command deprecates the show ip pimsm
componenttable command.
Syntax
show ip pimsm bsr
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The following information is displayed:
BSR address
Uptime
BSR Priority
Hash mask length
Next bootstrap message in
Next Candidate RP
advertisement in
RP
IP address of the BSR.
Length of time that this router has been up (in hours, minutes, and
seconds).
Priority as configured in the ip pimsm bsr-candidate command.
Length of a mask (32 bits maximum) that is to be ANDed with the group
address before the hash function is called. This value is configured in the
ip pimsm bsr-candidate command.
Time (in hours, minutes, and seconds) in which the next bootstrap
message is due from this BSR.
Time (in hours, minutes, and seconds) in which the next candidate RP
advertisement will be sent.
List of IP addresses of RPs.
Multicast Commands
723