Table of Contents
Advertisement
Chapter 3 Remote Panel Operation
3.8 SNMP Setup Information
3.8
SNMP Setup Information
Click the [SNMP] button displayed under [Information] to reference SNMP setup information such as the
community, the trap destination address, and the send trap function. The following window is displayed.
Figure 3.29 SNMP setup information display window
Table 3.26 SNMP setup information
Display item
Community
User Info
Trap Destination Address
Send Trap
Device Administrator
Device Name
Device Location
Monitored Port
Engine ID
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Displays communities (up to five communities).
Displays following user information (up to five communities):
"User Name", "Authentication", "Authentication Mode", "Encryption", and "Encryption
Mode"
Displays "IP Addresses" for Trap destinations (up to 10 destination addresses).
Also displays "SNMP Version", "Community", and "User Name" for Traps that are to be
sent.
Displays whether to send Trap.
•
Enable: Send trap.
•
Disable: Do not send Trap.
Displays the administrator name of the LT270 S2.
Displays the LT270 S2 name.
Displays the LT270 S2 installation location.
Displays the monitor target ports.
Displays the engine ID of the SNMP agent.
106
Copyright 2020 FUJITSU LIMITED
Explanation
P3AM-6932-06ENZ0
Advertisement
Table of Contents
