Table of Contents
Advertisement
Viewing Configuration Data
To view a configuration data report:
1. Under Email Type, select Configuration data.
2. Click View.
The System Configuration Report window displays.
3. (Optional) Click Save to save a local copy of the report in TXT format.
10.8.2
SNMP
The SNMP page allows you to configure the ETERNUS CS800 to send status messages
using SNMP (Simple Network Management Protocol). The ETERNUS CS800 supports
SNMP v1 and v2c.
SNMP works by sending messages, called protocol data units (PDUs), to different parts of a
network, or communities. SNMP compliant devices, called agents, store data about
themselves in Management Information Bases (MIBs) and return this data to the SNMP
requesters.
You can configure the ETERNUS CS800 to act as an agent and send traps to a specified
destination. You can also add SNMP community information.
To access the SNMP page, on the Notifications page, click the SNMP tab.
The SNMP page contains the following tabs:
"Destinations" on page 305
l
"Community" on page 309
l
"Test" on page 314
l
Destinations
The Destinations page allows you to manage the destinations the ETERNUS CS800 sends
SNMP traps to. You can add, edit, and delete SNMP destinations, and you can specify the
types of traps to send.
To access the Destinations page, on the SNMP page, click the Destinations tab.
ETERNUS CS800
10 Configuration
305
Advertisement
Table of Contents
