Operations For System Management; Operations Related To Advanced Copy - Fujitsu ETERNUS DX60 Operation Manual

Storage eternus sf express v16.2 windows/linux
Hide thumbs Also See for ETERNUS DX60:
Table of Contents

Advertisement

Using the Web Console, select the disk storage system, and then select the process on the Action pane.
The executable operations are as follows.
-
Display the storage port list
-
Display the FC port information, iSCSI port information, SAS port information and FCoE port information
-
Change the FC port settings, iSCSI port settings and SAS port settings
-
Display the number of hosts for port type
-
Add the FC host, iSCSI host and SAS host
-
Display the Affinity/LUN group list
-
Create, delete and change the affinity/LUN group
-
Display the Host Affinity list
-
Create and delete the Host Affinity
Note
-
For ETERNUS DX200F, SAS port configuration cannot be changed and SAS host cannot be added.
-
On the Web Console, the transfer rate of iSCSI-RA port cannot be changed.
Change the transfer rate on the ETERNUS Web GUI.
-
Multiple VLAN functions of iSCSI port are not supported.
On the Web Console, a basic IP address (#0) can be set and viewed. However, expanded virtual IP addresses (#1 through #15)
cannot be set and viewed. Set and view the configuration information for expanded virtual IP addresses on the ETERNUS Web
GUI.

4.1.8 Operations for System Management

Express can execute operations related to the disk storage system management.
Using the Web Console, select the disk storage system, and then select the process on the Action pane.
The executable operations are as follows.
-
Display the license
-
Register and delete the license
-
Display the Eco-mode
-
Configure the Eco-mode
-
Enable and disable the encryption mode
Note
Eco-mode is not configurable for ETERNUS DX200F.

4.1.9 Operations Related to Advanced Copy

Express can execute operations related to the Advanced Copy for the disk storage system.
Using the Web Console, select the disk storage system, and then select the process on the Action pane.
The executable operations are as follows.
-
Configure the copy table size for Advanced Copy
-
Configure the connection type for ETERNUS Disk storage system
- 16 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents