Copy Data Destination Volume (Sdpv) Creation; Figure 14 Copy Data Destination Volume (Sdpv) Creation - Fujitsu ETERNUS DX S5 Series Configuration Manual

6. Configuration Settings for RAID Groups or Thin Provisioning
When Using SnapOPC+ (SDVs and SDPVs)
*2: If "7" is specified for the number of volumes, sdv0, sdv1, sdv2, sdv3, sdv4, sdv5, and sdv6 volumes are created.
A confirmation screen appears.
4
Click the [OK] button.
The volume is created and the registration completion screen appears.
5
Click the [Done] button.
The screen returns to the [Volume] screen.

Copy Data Destination Volume (SDPV) Creation

Create a copy data destination volume in the backup RAID group.
Create a volume as an expansion area of SDV in the backup RAID group "RG1" created in
(page 109).
Figure 14 Copy Data Destination Volume (SDPV) Creation
Backup RAID group (RG1)
1.92TB
1.92TB
1.92TB
RAID5 (2+1)
Copy data destination volume
500GB
sdpv
(Snap Data Pool Volume)
118
"RAID Group Creation"
Configuration Guide (Basic)