Updating Version Information; Upgrading Advancedcopy Manager Copy Control Module; Preparing For Upgrade; Selecting Install Program - Fujitsu ETERNUS SF Express V16.6 Migration Manual

8.2.10 Updating Version Information

If not using cluster operation, and moreover, if the restoration of repository data has already been performed with the restoration of
the replication management list, execute Web Console or the stgxfwcmmodsrv command to update the version information for the
Managed Server. The stgxfwcmmodsrv command must be executed on the Management Server.
When executing the stgxfwcmmodsrv command, specify the Managed Server name for the -n option.
-
When the Management Server OS is Windows
programDir\ACM\bin\stgxfwcmmodsrv -n serverName
-
When the Management Server OS is Solaris or Linux
/opt/FJSVswstf/bin/stgxfwcmmodsrv -n serverName
Finally, perform the following operations with Web Console to reload the server information.
1.
On the global navigation tab, click Server.
The registered server list is displayed in the Main pane.
2.
On the Main pane, check the target server checkbox.
If the target server is a VM guest, check the checkbox of the VM host where the VM guest exists.
3.
On the Action pane, click Reload Conf. under Server.
Note
For updating the version information, start a new window for command execution, and then perform the procedure on the window.
See
-
Refer to "Command References" in the ETERNUS SF AdvancedCopy Manager Operation Guide relevant to the OS of the Management
Server for information on the command.
-
Refer to "Reload Server Configuration Information" in the ETERNUS SF Web Console Guide for information on reloading the server
information using Web Console.

8.3 Upgrading AdvancedCopy Manager Copy Control Module

8.3.1 Preparing for Upgrade

8.3.1.1

Selecting Install Program

There are two methods of performing the upgrade for the AdvancedCopy Manager Copy Control Module, as follows:
-
[Method 1] Install the ETERNUS SF Manager program and use the AdvancedCopy Manager Copy Control Module included with the
ETERNUS SF Manager.
-
[Method 2] Install and use the AdvancedCopy Manager Copy Control Module.
Point
For Method 1, in addition to the command line interface, it is also possible to perform the AdvancedCopy Manager Copy Control Module
operations from Web Console. However, this approach has the following drawbacks:
-
The disk space required for installation is greater than that for Method 2.
-
There are more incompatible software issues when compared to Method 2.
- 130 -