Configure Log Target Format - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

configure log target format

configure log target [console-display | memory-buffer | nvram | session |
syslog [<host name/ip> {:<udp-port>} [local0 ... local7]]] format [date
[dd-mm-yyyy | dd-Mmm-yyyy | mm-dd-yyyy | Mmm-dd | yyyy-mm-dd | none] |
host-name [on | off] | event-name [component | condition | none |
subcomponent] | priority [on | off] | process-id [on | off] | process-name
[on | off] | sequence-number [on | off] | severity [on | off] |
source-function [on | off]
| source-line [on | off]] | tag-id [on | off]
| tag-name [on | off] | timestamp [seconds | hundredths | none]
Description
Configures the formats of the items that make up a message, on a per-target basis.
Syntax Description
console-display Specifies the console display.
memory-buffer Specifies the switch memory buffer.
nvram Specifies the switch NVRAM.
session Specifies the current session (including console display).
syslog Specifies a syslog target.
host name/ip Specifies the syslog host name or IP address.
udp-port Specifies the UDP port number for the syslog target.
local0... local7 Specifies the local syslog facility.
timestamp Specifies a timestamp formatted to display seconds, hundredths, or none.
date Specifies a date formatted as specified, or none.
severity Specifies whether to include the severity.
event-name Specifies how detailed the event description will be. Choose from none, component,
subcomponent, or condition.
host-name Specifies whether to include the host name.
priority Specifies whether to include the priority.
tag-id Specifies whether to include the internal task identifier.
tag-name Specifies whether to include the task name.
sequence-number Specifies whether to include the event sequence number.
process-name Specifies whether to include the internal process name.
process-id Specifies whether to include the internal process identifier.
source-function Specifies whether to include the source function name.
source-line Specifies whether to include the source file name and line number.
Default
The following defaults apply to console display, memory buffer, NVRAM, and session targets:
• timestamp—hundredths
• date—mm-dd-yyyy
688 ExtremeWare 7.5 Command Reference Guide