Configure Log Target Format - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Status Monitoring and Statistics

configure log target format

configure log target [console | memory-buffer | nvram | session | syslog
[all | <ipaddress> {vr <vr_name>} local0 ... local7]]]
format [timestamp [seconds | hundredths | none]
| date [dd-mm-yyyy | dd-Mmm-yyyy | mm-dd-yyyy | Mmm-dd | yyyy-mm-dd | none]
| severity
| event-name [component | condition | none | subcomponent]
| priority
| process-name
| process-slot
| source-line
Description
Configures the formats of the items that comprise a message, on a per-target basis.
Syntax Description
console
memory-buffer
nvram
session
syslog
all
ipaddress
vr_name
local0 ... local7
timestamp
date
severity
event-name
priority
process-name
process-slot
source-line
Default
The following defaults apply to console display, memory buffer, NVRAM, and session targets:
• timestamp—hundredths
• date—mm-dd-yyyy
• severity—on
• event-name—condition
• priority—off
322
Specifies the console display.
Specifies the switch memory buffer.
Specifies the switch NVRAM.
Specifies the current session (including console display).
Specifies a syslog target.
Specifies all remote syslog servers.
Specifies the syslog IP address.
Specifies the virtual router that can reach the server IP address.
Specifies the local syslog facility.
Specifies a timestamp formatted to display seconds, hundredths, or none.
Specifies a date formatted as specified, or none.
Specifies whether to include the severity.
Specifies how detailed the event description will be. Choose from none,
component, subcomponent, or condition.
Specifies whether to include the priority.
Specifies whether to include the internal process name.
Specifies which slot number the message was generated.
Specifies whether to include the source file name and line number.
ExtremeWare XOS 11.0 Command Reference Guide