Configuration And Statistics Panel - Extreme Networks Summit WMScanner User Manual

Configuration and Statistics Panel

Link Information Tab.
The Link Information tab shows the performance of the current link. This tab contains the following
information: information:
SSID - The SSID of the AP.
●
BSSID – The BSSID of the AP.
●
Air Standard – The air standard used for the data transfer.
●
Channel (Ext.) – The 802.11 channel number used to transfer data. An extension channel is used if the
●
data transfer is currently happening in the 40 MHz channel width.
RSSI – The Received Signal Strength Indicator (RSSI). This is measured in -dBm.
●
Noise – The noise detected on the access point channel.
●
Receive Data Rate – The average rate at which data packets are being received, while the constant
●
data transfer is happening.
Channel Width Performance – An indication about the performance of the AP – client link with respect
●
to the channel width being used for the data transfer.
Guard Interval – An indication about the performance of the AP – client link with respect to the
●
guard interval being used for the data transfer.
MIMO Performance – An indication about the performance of the AP – client link with respect to the
●
MIMO parameters being used for the data transfer.
NOTE
This tab will not be displayed when the AP Performance measurements are done using a standard WLAN adapter.
Summit WMScanner Users Guide
95