Configure Ospf Spf-Hold-Time - Extreme Networks ExtremeWare XOS Command Reference Manual
Version 11.0
Hide thumbs
Also See for ExtremeWare XOS:
- Command reference manual (2024 pages) ,
- Manual (698 pages) ,
- Command reference manual (1712 pages)
Table of Contents
Advertisement
configure ospf spf-hold-time
configure ospf spf-hold-time
configure ospf spf-hold-time <seconds>
Description
Configures the minimum number of seconds between Shortest Path First (SPF) recalculations.
Syntax Description
seconds
Specifies a time in seconds. The range is 0 to 300 seconds.
Default
3 seconds.
Usage Guidelines
None.
Example
The following command configures the minimum number of seconds between Shortest Path First (SPF)
recalculations:
configure ospf spf-hold-time 6
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
711
Advertisement
Table of Contents
