Show Ports Packet - Extreme Networks ExtremeWare XOS Command Reference Manual

show ports packet

show ports {<port_list>} packet
Description
Displays a histogram of packet statistics.
Syntax Description
port_list
Default
N/A.
Usage Guidelines
If you do not specify a port number or range of ports, the system displays information for all ports.
This status information may be useful for your technical support representative if you have a network
problem.
The following packet statistics are displayed:
• Port number
• Link status
• Packet size
Example
The following command displays packet statistics for slot 1, port 1, slot 2, port 1, and slot 5, ports 1
through 8 on a modular switch:
show ports 1:1, 2:1, 5:1-5:8 packet
Following is sample output from this command:
Port Link
State
================================================================================
1:1 A
2:1 R
5:1 R
5:2 R
5:3 R
5:4 R
5:5 R
5:6 R
5:7 R
5:8 R
================================================================================
ExtremeWare XOS 11.0 Command Reference Guide
Specifies one or more ports or slots and ports. May be in the form 1, 2, 3-5,
2:*, 2:5, 2:6-2:8.
0-64 65-127 128-255
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Link Status: A-Active R-Ready
Packet Sizes
256-511 512-1023
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
show ports packet
1024-1518 Jumbo
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
223