Show Ports Packet - Extreme Networks ExtremeWare Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

show ports packet

show ports {mgmt | <portlist>| vlan <vlan name>} packet
Description
Displays a histogram of packet statistics.
Syntax Description
mgmt Specifies the management port Supported only for switches that provide a management port, such
as the Summit 400.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and
ports. On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5,
2:*, 2:5, 2:6-2:8.
vlan name Specifies a VLAN name.
Default
N/A
Usage Guidelines
If you do not specify a port number or range of ports, a histogram is displayed for all ports.
On a modular switch,
<portlist>
can be one or more port numbers. For a detailed explanation of port specification, see "Modular Switch
Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.
This status information may be useful for your technical support representative if you have a network
problem.
The following packet statistics are displayed:
• port number
• link status
• packet size
Example
The following command displays packet statistics for ports 1 through 6 on a stand-alone switch:
show ports 1-6 packet
Receive Packet Statistics
Port Link
Status
================================================================================
1 A 410465
2 A 397578
3 R
4 A 394646
5 A 394141
6 A 394741
Sun Sep 12 14:48:40 2004=======================================================
342
can be a list of slots and ports. On a stand-alone switch,
Packet Sizes
0-64 65-127 128-255
3548292 97395
1724578 94290
0 0 0
2485133 102640
2439441 89201
2099487 67017
Sun Sep 12 14:48:59 2004
256-511 512-1023 1024-1518
51257 7390 1547785
49422 10469 2491883
0 0
52893 5945 1537346
49095 4141 1532115
40001 4143 2540292
<portlist>
Jumbo
0
0
0 0
0
0
0
ExtremeWare 7.7 Command Reference Guide