Commands for Configuring Slots and Ports on a Switch
show ports configuration
show ports {<port_list>} configuration
Description
Displays port configuration statistics.
Syntax Description
port_list
Default
N/A.
Usage Guidelines
If you do not specify a port number or range of ports, configuration statistics are displayed for all ports.
This status information may be useful for your technical support representative if you have a network
problem.
This command displays port configuration, which includes:
• Virtual router
• Port state
• Autonegotiation information
• Link state
• Link speed
• Duplex mode
• Flow control
• Load sharing information
• Link media information
Example
The following command displays the port configuration statistics for slot 2, port 2:
show ports 2:2 configuration
218
Specifies one or more slots and ports. On a modular switch, can be a list of
slots and ports. May be in the form 3-5, 2:*, 2:5, 2:6-2:8.
ExtremeWare XOS 11.0 Command Reference Guide