Modifying The Es Snmp Settings; Modifying The Es Root Account Password; Viewing Es Status - Extreme Networks Sentriant AG Software User's Manual

System Configuration

Modifying the ES SNMP Settings

To change the ES SNMP settings:
Home window>>System configuration>>Enforcement clusters & servers>>Select an ES>>Configuration
1 Select the Enable SNMP check box.
2 Enter a Read community string, such as
3 Enter the Allowed source network. This value must be either
CIDR notation.

Modifying the ES root Account Password

To change the ES root account password:
Home window>>System configuration>>Enforcement clusters & servers>>Select an ES>>Configuration
1 Enter the new password in the Root password text box in the Other settings area.
2 Re-enter the password in the Re-enter root password text box.
3 Click ok.

Viewing ES Status

There are two ways Sentriant AG provides ES status:
The icons next to the server name (see
●
The Status window (see the following steps). The Enforcement server window allows you to view
●
the following information:
Health status
■
Upgrade status
■
Process/thread status
■
System load average for the server
■
Current endpoints being tested/minute for the server
■
Percentage of memory used on the server
■
Disk space usage for the server
■
To view ES status:
Home window>>System configuration>>Enforcement clusters & servers
58
.
Public2
default
Figure 15 on page 55)
or a network specified in
Sentriant AG Software Users Guide, Version 5.2