Commands for Managing the Switch
disable snmp traps
disable snmp traps
Description
Prevents SNMP traps from being sent from the switch.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
This command does not clear the SNMP trap receivers that have been configured. The command
prevents SNMP traps from being sent from the switch even if trap receivers are configured.
Example
The following command prevents SNMP traps from being sent from the switch to the trap receivers:
disable snmp traps
History
This command was first available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
190
ExtremeWare 7.7 Command Reference Guide