Configure Snmpv3 Delete User - Extreme Networks ExtremeWare Command Reference Manual

configure snmpv3 delete user

configure snmpv3 delete user [all-non-defaults | {hex} <user name>]
Description
Delete an existing SNMPv3 user.
Syntax Description
all-non-defaults
hex
user name
Default
N/A.
Usage Guidelines
Use this command to delete an existing user.
Use the
all-non-defaults
default user names are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv.
Deleting a user will not implicitly remove the related group to user association from the
VACMSecurityToGroupTable. To remove the association, use the following command:
configure snmpv3 delete group {{hex} <group name>} user [all-non-defaults | {{hex}
<user name> {sec-model [snmpv1|snmpv2c|usm]}}]
Example
The following command deletes all non-default users:
configure snmpv3 delete user all-non-defaults
The following command deletes the user guest:
configure snmpv3 delete user guest
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies that all non-default (non-permanent) users are to be deleted.
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the user name to add or to clone from.
keyword to delete all users, except for the default (permanent) users. The
configure snmpv3 delete user
153