Commands for Managing the Switch
configure snmpv3 delete user
configure snmpv3 delete user [all-non-defaults | [[hex <hex_user_name>] |
<user_name>]]
Description
Deletes an existing SNMPv3 user.
Syntax Description
all-non-defaults
hex_user_name
user_name
Default
N/A.
Usage Guidelines
Use this command to delete an existing user.
Use the
all-non-defaults
default user names are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv.
Deleting a user will not implicitly remove the related group to user association from the
VACMSecurityToGroupTable. To remove the association, use the following command:
configure snmpv3 delete group {[[hex <hex_group_name>] | <group_name>]} user
[all-non-defaults | {[[hex <hex_user_name>] | <user_name>] {sec-model
[snmpv1|snmpv2c|usm]}}]
Example
The following command deletes all non-default users:
configure snmpv3 delete user all-non-defaults
The following command deletes the user guest:
configure snmpv3 delete user guest
History
This command was first available in ExtremeWare XOS 10.1.
The
parameter was added in ExtremeWare XOS 11.0.
hex_user_name
112
Specifies that all non-default (non-permanent) users are to be deleted.
Specifies the user name to delete. The value is to be supplied as a colon
separated string of hex octets.
Specifies the user name to delete.
keyword to delete all users, except for the default (permanent) users. The
ExtremeWare XOS 11.0 Command Reference Guide