Configure Snmp Sysname - Extreme Networks ExtremeWare XOS Command Reference Manual

configure snmp sysName

configure snmp sysName
configure snmp sysname <sysName>
Description
Configures the name of the switch.
Syntax Description
sysName An alphanumeric string that specifies a device name.
Default
The default is the model name of the device (for example, ).
sysname BlackDiamond10808
Usage Guidelines
You can use this command to change the name of the switch. A maximum of 32 characters is allowed.
The appears in the switch prompt.
sysname
To view the name of the system listed on the switch, use the command. The
show switch show switch
command displays switch statistics including the name of the system.
Example
The following command names the switch:
configure snmp sysname engineeringlab
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide 81