Configure Snmp Syslocation - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

configure snmp sysLocation

configure snmp syslocation <sysLocation>
Description
Configures the location of the switch.
Syntax Description
sysLocation An alphanumeric string that specifies the switch location.
Default
N/A.
Usage Guidelines
Use this command to indicate the location of the switch. A maximum of 255 characters is allowed.
To view the location of the switch on the switch, use the command. The
show switch show switch
command displays switch statistics including the location of the switch.
Example
The following command configures a switch location name on the system:
configure snmp syslocation englab
History
This command was first available in ExtremeWare XOS 10.1.
80 ExtremeWare XOS 11.0 Command Reference Guide